CEMONT TF 300 - User Manual

EN Safety instruction for use and maintenance - Do not destroy this manual
FR Instruction de securite d’emploi et d’entretien - Conserver ce livret d’instructions
ES Instrucciones de seguridad, empleo y mantenimiento - Conservar el presente manual
IT Istruzioni per la sicurezza nell’uso e per la manutenzione - Conservare il presente libretto
DE Betriebs-Wartungs und Sicherheitsanleitung - Das vorliegende Handbuch gut aufbewahren
PT Instrucões de segurança de utilização e de manutenção - Conserve este manual
SV Instruktioner för säkerhet, använding och underåll - Spar denna handledning
NL Veiligheidsinstructies voor gebruik en onderhoud - Bewaar deze handleiding
RO Instructiuni privind siguranta in exploatare si intretinerea - Pastrati acest manual
SK Bezpečnostné pokyny pri používaní a pri údržbe - Odložte si tento návod na použitie
CS Bezpečnostní pokyny pro používání a údržbu - Návod na používání si uchovejte
HU Használati és karbantartási biztonsági utasítások - Kerjük őrizze meg ezt a hasznsnalati utasítást
PL Instrukcje bezpieczeństwa podczas obsługi i konserwacji - Zachować niniejszą instrukcję na przyszłość
EL Οδηγιεσ ασφαλειασ κατα τη χρηση και τη συντηρηση – φυλαξτε το παρον εγχειριδιο
RU Руководство по безопасной эксплуатации и техническому обслуживанию
www.airliquidewelding.com
Air Liquide Welding - 13, rue d’Epluches - BP 70024 Saint-Ouen L’Aumône
Cat. Nr.:
Rev.:
Date:
TF 300 / TF 400 / TF 400H
800035647
00
28. 10. 2008

Summary

1.0 TECHNICAL DESCRIPTION

1.1 DESCRIPTION

Details the wire feeder's function with a generator for direct wire welding.

1.2 TECHNICAL CHARACTERISTICS

Lists specifications like model, wire range, reel sizes, and gas for welding units.

3.0 WIRE REEL INSTALLATION

3.2 START-UP

Steps to prepare and start the welding machine after installation.

4.0 DESCRIPTION OF FRONT PANEL CONTROLS

4.1 FRONT PANEL

Identifies and explains the function of each control on the front panel.

6.0 CONNECTION AND PREPARATION OF EQUIPMENT FOR WELDING

6.1 WELDING

Guidance on connecting accessories and preparing for the welding process.

7.0 MIG WELDING FAULTS

7.1 FAULT CLASSIFICATION AND DESCRIPTION

Details common MIG welding faults, their appearance, causes, and remedies.

8.0 GENERAL MAINTENANCE

8.1 TORCH MAINTENANCE

Procedures for maintaining the welding torch, including nozzle and guide tube.

8.2 CONNECTING THE TORCH

Instructions for correctly connecting the torch to the wire feeder unit.

CEMONT TF 300 Specifications

General

Brand	CEMONT
Model	TF 300
Category	Welding System
Language	English