Page 6 For technical questions, please call 1-888-866-5797. Item 66967
Specifications
Input Voltage 12 VDC (nominal)
Output Voltage 115 VAC / 60 Hz
Continuous Power 200 W
Surge Power 400 W
Operating Conditions 32° - 104° F
Receptacles
Two 3-prong grounded polarized AC outlets
One 5 VDC 500mA USB outlet
Fuse Type 25 Amp Internal Blade-type Fuse (professional replacement only)
Cables 12 AWG x 23"
Output Waveform
Modified
Sine Wave
(MSW)
1. This inverter’s output is a
Modified Sine Wave. Power from
most electric utilities is a Sine Wave.
Note: Only multimeters identified
as “TRUE RMS” will read
Modified Sine Wave voltage accurately.
2. Modified Sine Wave (MSW) power is
suitable for most AC devices and power
supplies used in electronic equipment,
transformers, and motors. Do not use
to power sensitive devices such as
medical equipment or computers. Some
audio equipment may perform poorly
if run on Modified Sine Wave power.
3. Sine Wave inverters provide power
that is identical to, or even better than,
the power supplied by your power
company. Motors start easier and
run cooler under Sine Wave power.
Certain devices, such as laser printers,
variable speed motors and digital
clocks, require sine wave power to
operate properly. Sine wave inverters
are typically more expensive for
their capacity than other inverters.
3069523
To Next Page
Loading...
