SKU 42396/95652 For technical questions, please call 1-800-444-3353. Page 7
NOTE: No internal replacement parts are available for this tool.
Maintenance
1. To prevent oxidation, periodically open Transformer Jaws and wipe the
magnetic pole pieces with a lightly oiled cloth.
2. Wipe unit with a slightly damp cloth using a light detergent. Do not use
solvents or abrasives.
3. Remove battery if not in use for long periods.
4. Store unit in the carrying case and place in a dry location.
5. Other than the battery, there are no replaceable parts on this unit. Repairs
should be done by a qualied technician.
Battery Replacement
1. Remove the Test Leads from the multimeter.
2. Turn the unit over.
3. Remove back cover.
4. Pull battery out of unit and replace.
5. Replace cover.
Measurement Applications
• Household uses – Verify and measure current ow and voltage to such
appliances as electric water heaters, fan motors, generators, and pumps.
Measure excessive current ow on circuits in distribution panels which are
tripping circuit breakers. Check for wire continuity or resistance using the
Test Leads and Ohms function.
• Distribution transformers – Measure load on each phase for balance and
for excessive current draw.
• Motors – Measure starting current, running current, and current imbalance
between phases.
• Variable speed motor controllers – Measure input and output currents.
Brought to You by Augusta Flint
To Next Page
Loading...
Need help?
General
