EasyManuals Logo

CEN-TECH 42396 User Manual

CEN-TECH 42396
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
SKU 42396/95652 For technical questions, please call 1-800-444-3353. Page 3
Save This Manual
You will need the manual for the safety warnings and
precautions, and operating and maintenance procedures.
Keep your invoice with this manual. Write the invoice number
on the inside of the front cover. Keep the manual and invoice
in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always
be followed to reduce the risk of personal injury and damage to
equipment.
Read all instructions before using this tester!
1. Test cable voltages with care. Only use one hand when securing the
tester around the cable to reduce risk of injury in case of electric shock.
2. Avoid working alone. If an accident happens, an assistant can bring
help.
3. Keep work area clean. Cluttered areas invite injuries.
4. Avoid electrical shock. Use extreme caution when clamping around
uninsulated conductors or bus bars. Prevent body contact with grounded
surfaces such as pipes, radiators, ranges, and cabinet enclosures when
testing voltages.
5. Avoid damaging meter. Use only as specied in this manual.
6. Observe work area conditions. Do not test voltages in damp or wet
locations. Don’t expose to rain. Keep work area well lit.
7. Keep children away. Children must never be allowed in the work area.
Do not let them handle machines, tools, or extension cords.
8. Store idle equipment. When not in use, tools must be stored in a dry
location to inhibit rust. Always lock up tools and keep out of reach of
children.
9. Dress properly. Protective, electrically nonconductive clothes and
nonskid footwear are recommended when working.
10. Use eye protection. Always wear ANSI approved impact safety goggles.
11. Do not overreach. Keep proper footing and balance at all times. Do
not reach over or across electrical cables or frames.
12. Maintain tools with care. Ensure multimeter has a fresh battery.
Inspect tool cords periodically and, if damaged, have them repaired by
an authorized technician.
13. Stay alert. Watch what you are doing, use common sense. Do not
operate any tool when you are tired.
Brought to You by Augusta Flint

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CEN-TECH 42396 and is the answer not in the manual?

CEN-TECH 42396 Specifications

General IconGeneral
BrandCEN-TECH
Model42396
CategoryMultimeter
LanguageEnglish

Related product manuals