Page 3SKU 47257 For technical questions, please call 1-800-444-3353.
The warnings, precautions, and i.
instructions discussed in this
instruction manual cannot cover all
possible conditions and situations
that may occur. It must be under-
stood by the operator that common
sense and caution are factors which
cannot be built into this product, but
must be supplied by the operator.
SAVE THESE
INSTRUCTIONS.
SPECIFICATIONS
Display Scales Inches & Millimeters
Display Digits LCD (Liquid Crystal Display)
Range 0” - 6”, Or 0mm - 200mm
Accuracy
Inches: ±0.001"
Metric: ±0.03mm
Display
Inches: 0.0005"
Metric: 0.01mm
Measuring
Positions
4-Way Measuring:
Outside, Inside, Depth, Step
Power Supply
One 1.5V DC SR44 Button
Cell Battery (Included)
Shut-Off
Off Button,
4-1/2 Minute (Automatic)
UNPACKING
When unpacking, check to make
sure that the item is intact and undam-
aged. If any parts are missing or broken,
please call Harbor Freight Tools at the
number shown on the cover of this manual
as soon as possible.
List of Contents
Part(s) Description Qty
1 6” Digital Calliper 1
1 Foam Lined Molded Case 1
1 Cell Battery (One inserted into
caliper and one in case)
2
OPERATING INSTRUCTIONS
Read the ENTIRE
IMPORTANT SAFETY
INFORMATION section at
the beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
Note: Do not bump or shock the Digital
Caliper. Rough treatment may dam-
age the highly sensitive mechanism.
Components and Controls
Figure 1
LCD
Screen
Depth
Measuring
Blade
Locking
Screw
Sliding
Ruler
Inside
Measurement
Jaws
Outside
Measurement
Jaws
Thumb
Wheel