Page 8 For technical questions, please call 1-888-866-5797. Item 59458
SAFETY OPERATION MAINTENANCESETUP
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
Electrical shock can cause death or injury! NEVER TOUCH
exposed conductors of electricity.
General Operating Instructions
MODE/Auto Backlight
Press and hold the
MODE/Auto Backlight button for 2 seconds
to turn the backlight on. Press again for
2 seconds to turn the backlight off.
Note: the Backlight will only illuminate
in dark areas, or if the light sensor
below the LCD screen is covered.
Note: Frequent use of the backlight will
shorten the life of the batteries. Only
use the backlight when necessary.
Data Hold/Backlight
• To freeze the LCD meter reading,
press the Hold/Backlight button.
• While data hold is active, the HOLD
display icon appears on the LCD.
• Press the Hold/Backlight Button
again to return to normal operation.
• Press and hold the Hold/Backlight
Button for 2 seconds to turn the
backlight on, press again for 2
seconds to turn the backlight off.
Note: the Backlight will only illuminate
in dark areas, or if the light sensor
below the LCD screen is covered.
Note: Frequent use of the backlight will
shorten the life of the batteries. Only
use the backlight when necessary.
To Next Page
Loading...
Need help?
General
