EasyManua.ls Logo

CEN-TECH 60322 - User Manual

CEN-TECH 60322
12 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
REV 14h
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2012 by Harbor Freight Tools
®
. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
Owner’s Manual & Safety Instructions

Table of Contents

Questions and Answers

  • A
    Andrew ChavezAug 1, 2025
    What to do if CEN-TECH Battery Charger needle moves to full charge then drops to zero?
    • J
      Jim SmithAug 1, 2025
      If the Charge Meter needle moves up to full charge and then drops to zero while making a clicking noise, here's what might be happening and what you can do: * **Reversed battery connections:** Double-check the connection polarity. If it's wrong, shut off the charger and correct the cable lead connections. * **Battery is completely dead:** Continue charging the battery. The charger will continue to reset itself until the battery reaches a chargeable level. * **Defective battery:** Check and/or replace the battery. * **Charger is resetting:** Wait until the Charger automatically resets itself after a circuit overload. * **Circuit breaker is cycling:** The switch might be in the wrong position.
  • A
    Alyssa GoldenAug 8, 2025
    Why is my CEN-TECH 60322 Battery Charger charging current not at full output?
    • B
      Barbara HoltAug 8, 2025
      The charging current might not be at full output for these reasons: * The battery may already be partially charged, in which case, continue charging the battery. * The battery could be defective and unable to hold a full charge. In this case, check or replace the battery.
  • S
    sandovaljustinAug 16, 2025
    How to fix CEN-TECH 60322 Battery Charger with no charge meter reading?
    • Y
      ycookAug 16, 2025
      If there is no Charge Meter reading on your CEN-TECH Battery Charger, consider the following possibilities: * **Battery not connected:** Connect the battery to the charger. The Charge Meter will not show a reading until a battery is attached. * **No power to charger:** Check the power and cable outlet connections. * **Battery cables not making connection:** Clean the battery cables and reset the cable clamps. * **Two-amp charge rate being used:** The meter will not indicate at this rate.
  • S
    Susan ClarkAug 25, 2025
    What to do if CEN-TECH Battery Charger display reads maximum?
    • C
      courtneysawyerAug 25, 2025
      If the Charge Meter display reads maximum, the cause may be a defective battery. Check or replace the battery.

Summary

Warning Symbols and Definitions

DANGER

Indicates a hazardous situation which, if not avoided, will result in death or serious injury.

WARNING

Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION

Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

NOTICE

Addresses practices not related to personal injury.

Safety Symbols and Certifications

Includes CSA, UL, VAC, Amperes, CCA, RC, Ah, eye injury, and fire risk symbols.

Important Safety Instructions

General Safety Precautions

Covers avoiding rain, using proper attachments, handling cords, and not operating damaged chargers.

Explosive Gas Warning

Details hazards of lead-acid batteries and precautions to reduce explosion risk.

Personal Precautions When Charging

Includes eye protection, acid contact response, no smoking, tool handling, and metal item removal.

Preparation and Connection Procedures

Covers preparing to charge, charger location, DC connection, and connecting battery in/out of vehicle.

General Operation and Maintenance Safety

Covers goggles, labels, product handling, unplugging, timer use, battery types, and servicing.

Grounding and AC Power Cord Connection

Grounding Requirements

Ensures safe connection via grounded outlet and plug, avoiding adapters.

AC Cord and Plug Safety

Warns against altering the cord/plug and advises professional replacement for damage.

Specifications

Electrical Rating

Details the charger's voltage, frequency, and amperage (120VAC/60Hz/1.3A).

Charge Settings

Lists available charge rates and voltages (6A, 12V; 2A, 12V; 6A, 6V).

Cables and Features

Specifies battery cable details (Red/Black, AWG) and power cord length, plus features like Charge Meter and circuit breaker.

Operating Instructions

Controls Overview

Details the Charge Meter and Mode Switch for adjusting voltage/amperage output.

Charge Meter Indicators

Explains the meter readings for discharged, nearly full, and fully charged batteries.

Preparing to Charge

Battery Preparation Steps

Covers removing battery, ventilation, cleaning terminals, adding water, and checking manufacturer specs.

Battery Voltage and Charging Rate

Ensures battery voltage matches charger output and setting the initial charge rate.

Special Battery Conditions

Addresses issues with shorted, cold, or frozen batteries, and hydrometer eye usage.

Charger Location

Optimal Placement Guidelines

Advises locating charger away from battery, avoiding placement above battery, and ensuring ventilation.

Charging Rate;Time Table

Charging Rates and Typical Uses

Provides a table detailing charging voltage, switch settings, charging times, and typical battery uses.

Charging Battery Installed in Vehicle

Vehicle Installation Precautions

Covers positioning cables, staying clear of moving parts, checking polarity, and connecting clips.

Grounding and Connection Steps

Details connecting positive/negative clips to ungrounded posts or chassis based on battery grounding.

Charging Battery Outside Vehicle

Off-Vehicle Charging Procedure

Outlines steps for charging a battery removed from the vehicle, including clip connection and safety.

Maintenance Instructions

Pre-Use Inspection

Check for loose hardware, cracked parts, damaged wiring, or other conditions affecting safe operation.

Post-Use Cleaning

Wipe external surfaces of the tool with a clean cloth after use.

Service and Repair Policy

Emphasizes qualified technician for cord replacement; no user-serviceable parts inside.

Troubleshooting

Charge Meter Issues

Addresses problems like maximum reading, no reading, or erratic needle movement.

Charging Current Problems

Covers issues with charging current not reaching full output or battery not holding charge.

Troubleshooting Precautions

Reminds users to follow safety precautions and disconnect power before servicing.

Limited 90 Day Warranty

Warranty Coverage and Exclusions

Details the 90-day warranty, exclusions for misuse, and limitations on liability.

Warranty Claim Procedure

Explains how to return products with proof of purchase and complaint for repair or replacement.

CEN-TECH 60322 Specifications

General IconGeneral
BrandCEN-TECH
Model60322
CategoryBattery Charger
LanguageEnglish

Related product manuals