CEN-TECH 92903 User Manual

DIGITAL BATTERY TESTER
WITH CCA SET CODE
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
Copyright
©
2005 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or
form without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
92903

CEN-TECH 92903 Specifications

General

Battery Voltage	6V/12V
Input Voltage	120V AC
Output Voltage	6V/12V DC
Charging Current	2A
Compatible Battery Types	AGM, Gel
Safety Features	Overcharge protection, Reverse polarity protection

Summary

Safety Warnings and Precautions

General Safety Precautions

Basic safety precautions to reduce the risk of personal injury and equipment damage.

Replacement Parts and Accessories

Guidelines for using identical replacement parts and approved accessories.

Unpacking

Unpacking Procedure

Verify that the product is intact and undamaged upon unpacking.

Operation

Testing the Battery

Procedure for testing the battery's performance and charge level.

Testing the Charging System

Procedure to test the vehicle's charging system for alternator and regulator output.

Starter Motor Test

Starter Motor Test Procedure

Steps to test the starter motor's performance and identify excessive current draw.

Display Codes and Meanings

Explanation of error codes and their possible causes or meanings.

Parts List Illustration