Page 2SKU 92903 For technical questions, please call 1-800-444-3353
Specifications
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, and parts list illustration. Keep your invoice with
this manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to re-
duce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use the Battery Tester in damp or wet
locations. Don’t expose to rain. Keep work area well lit. Do not use electrically
powered tools in the presence of flammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area. Do not let
them handle the Battery Tester.
4. Store idle equipment. When not in use, products must be stored in a dry location to
inhibit rust. Always lock up products and keep out of reach of children.
5. Use the right product for the job. Do not attempt to force a small Battery Tester to
do the work of a larger industrial Battery Tester. There are certain applications for
which this Battery Tester was designed. It will do the job better and more safely at the
rate for which it was intended. Do not modify this Battery Tester and do not use this
Battery Tester for a purpose for which it was not intended.
6. Dress properly. Do not wear loose clothing or jewelry as they can be caught in the
Battery Tester. Protective, electrically non-conductive clothes and non-skid footwear
are recommended when working. Wear restrictive hair covering to contain long hair.
7. Use eye and ear protection. Always wear ANSI approved impact safety goggles.
Wear a full face shield when working with battery acid. Wear an ANSI approved dust
mask or respirator when working around metal, wood, and chemical dusts and mists
8. Do not overreach. Keep proper footing and balance at all times. Do not reach over
or across running machines.
Battery Capacity 12 Volts DC, 125 Amps Load Capability
Maximum Capacity 300 - 1000 CCA Testing Capacity
Battery Cable Length 16” Long
Test Cycle 10 Second Test, 1 Min. Cool Down
3 Tests in 5 Min. Maximum
Overall Dimensions 11-1/4” x 6-1/2” x 2-1/2”
REV 07d
To Next Page
Loading...
Need help?
General
