Page 10 For technical questions, please call 1-800-444-3353. Item 60704
Maintenance and Servicing
Procedures not specifically explained in this manual
must be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ELECTRIC SHOCK:
Turn the Inverter off and disconnect its power supply before performing any
inspection, maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY FROM INVERTER FAILURE:
Do not use damaged Inverter. If abnormal noise, vibration, or heating occurs,
have the problem corrected before further use.
Wear splash-resistant ANSI-approved safety goggles and
electrically insulated gloves while working near batteries.
1. BEFORE EACH USE, inspect the
general condition of the Inverter. Check for:
• loose hardware,
• damaged electrical wiring,
• cracked or broken parts, and
• any other condition that may
affect its safe operation.
2. AFTER USE, clean external surfaces of
the Inverter with clean, dry cloth.
3. Maintain batteries according to manufacturer’s
instructions. Check electrolyte level on all
batteries after charging and refill as needed.
Charge batteries according to manufacturer’s
recommendations ONLY; incorrect charging
may cause battery damage or explosion.
4. DO NOT OPEN HOUSING.
Contains no user-serviceable parts.
Internal parts may be electrified,
even with Inverter off and
power disconnected.
5. Store the Inverter in a clean, dry, safe location out
of reach of children and other unauthorized people.
6. Internal electronic components must be
disposed of properly or recycled.
To Next Page
Loading...
Need help?
General
