CEN-TECH 62142 - Scan Tool Setup Menu; Language Selection; Unit of Measure Configuration; Display Contrast Adjustment

Page 10 For technical questions, please call 1-888-866-5797. Item 62142
Setup
From the Startup Screen, press SCROLL to enter System Setup.
Note: Setup is not required to operate the Scan Tool.
CAN OBD2 CODE READER
[ENTER]-SCAN
[SCROLL]-SETUP
OBDII
Figure D
System Setup
1/4
►1) Language
2) Unit of Measure
3) Contrast
4) Exit
Figure E
Set Language
1. From System Setup, select
Language, then press ENTER.
2. Select desired language,
then press ENTER.
Language
3/5
►
Deutsch
English
Dutch
Espanol
Figure F
Unit of Measure
1. From System Setup, select
Unit of Measure, then press ENTER.
2. Select English or Metric,
then press ENTER.
Unit of Measure
1/2
►English
Metric
Figure G
Contrast
1. From System Setup, select
Contrast, then press ENTER.
2. Press SCROLL to change
contrast as needed.
Contrast
Contrast (50)
Use to change
Figure H
Brought to You by www.snapwhole.comBrought to You by www.snapwhole.com