To Next PageTo Next PageWhat to do if my CEN-TECH Barcode Reader shows a Vehicle Linking Error?
If your CEN-TECH Barcode Reader displays a Vehicle Linking Error, first ensure that your vehicle is OBD II compliant. Next, check that the vehicle's ignition is turned ON. If the issue persists, try resetting the tool by turning the ignition off, waiting 10 seconds, and then turning it back on.
Why my CEN-TECH Barcode Reader doesn’t power up?
If your CEN-TECH Barcode Reader isn't powering up, start by checking the OBD II cable connection to ensure it's securely connected to the vehicle's DLC. Then, inspect the vehicle's DLC pins for any bending or breakage; if found, a certified technician should repair the DLC. Lastly, verify that the vehicle's battery is providing at least 8V.
General| Brand | CEN-TECH |
|---|---|
| Model | 62142 |
| Category | Barcode Reader |
| Language | English |
Explains the On-Board Diagnostics II system and its role in vehicle monitoring.
Details the types of vehicles the Scan Tool is designed to work with.
Identifies the Scan Tool's cable, screen, and control buttons.
Step-by-step guide on connecting the Scan Tool to the vehicle's DLC.
Guide to setting the language displayed on the Scan Tool.
Instructions for selecting between English and Metric units.
How to adjust the brightness and contrast of the Scan Tool's display.
Procedure for accessing and viewing DTCs from vehicle control modules.
Details on retrieving Calibration IDs and verification numbers.
Information on accessing and interpreting in-use performance data.
Checklist for inspecting the Scan Tool's condition before each use.
Guidance on cleaning the tool and storing it safely.
