Page 11Item 96308
For technical questions, please call 1-888-866-5797.
Maintenance and Servicing
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
Cleaning, Maintenance, and Lubrication
1. Wipe unit with a dry, lint-free cloth.
Do not use solvents or abrasives.
2. Remove batteries if not in
use for long periods.
3. Store unit in a dry location.
4. Other than the batteries, there
are no replaceable parts on this
unit. Repairs should be done
by a qualified technician.
Battery Replacement
1. When the Low Battery symbol is
shown on the Display Screen, the
batteries are low and must be replaced.
2. Remove screw(s) and open
battery compartment.
3. Remove batteries and
dispose of properly.
4. Insert new batteries in correct
polarity, close compartment
and replace screw(s).
Calibration
Have the Meter calibrated by a qualified technician every year to maintain accuracy.
To Next Page
Loading...
Need help?
General
