To Next PageTo Next PageWhat to do if my CEN-TECH Metal Detector will not operate?
If your CEN-TECH Metal Detector isn't operating, the battery may be discharged, damaged, or the battery leads/connections could be faulty. First, check the battery for charge or damage. Then, inspect the battery leads and connections. If the battery is ok, install new batteries.
Why is my CEN-TECH 97245 Metal Detector giving erratic warning alarms?
An erratic warning alarm in your CEN-TECH Metal Detector may be due to corrupted tool settings or the sensitivity being set too high. Try installing a fresh battery. If that doesn't work, turn down the sensitivity using the rotary switch.
General| Type | Handheld Metal Detector |
|---|---|
| Sensitivity Adjustment | Yes |
| Audio Output | Yes |
| Power Source | 9V Battery |
| Discrimination Control | Yes |
| Operating Frequency | 6.6 kHz |
| Power Supply | 9V Battery |
| Audio Alert | Yes |
| Search Coil | 6.5 inches |
| Display | Analog |
| Target Identification | LED |
Ensures a safe working environment by maintaining cleanliness and proper lighting.
Precautions against electric shock, especially in wet conditions or with grounded surfaces.
Guidelines for staying alert, using safety equipment, and maintaining balance during operation.
Rules for proper usage, maintenance, and storage of battery-powered tools.
Recommendations for professional servicing and using identical replacement parts.
Covers avoiding unintentional starts, maintaining grip, and not leaving the tool unattended.
Advice for individuals with pacemakers regarding EMF exposure and safe operation.
Details on battery requirements, sensitivity, display, and operating temperature.
Guidance to ensure the item is intact and undamaged upon receipt.
Instructions for preparing the tool for use, including battery installation.
Describes the tool's utility in detecting metal in nonmetallic materials and its detection range.
Steps for setting up, turning on, using, and turning off the metal detector.
Procedures for safe maintenance, cleaning, and ensuring equipment integrity.
Identifies common problems and their probable causes and solutions.
A detailed list of all components included with the metal detector.
Visual representation showing the arrangement of parts within the tool.
Details the warranty coverage, exclusions, and claim procedures.
