14
VI. Maintenance:
WARNING!
Before open the battery door, disconnect both test lead
and never uses the meter before the battery door is
closed.
CAUTION
To avoid contamination or static damage, do not touch the
circuit board without proper static protection.
REMARK
* If the meter is not going to be used for a long time, take
out the battery and do not store the meter in high
temperature or high humidity environment.
* When take current measurement, keep the cable at the
center of the clamp will get more accurate test result.
* Repairs or servicing not covered in this manual should
only by qualified personal.
CLEANING
Periodically wipe the case with a dry cloth and detergent.
Do not use abrasives or solvents on this instrument.
To Next Page
Loading...
