Need help?Do you have a question about the Center 212 and is the answer not in the manual?
General| Resolution | 0.1°C/°F |
|---|---|
| Display | LCD |
| Power Supply | 9V Battery |
| Thermocouple Type | K |
| Measurement Range | -50°C ~ 1300°C / -58°F ~ 2372°F |
Specifies operating and storage environmental parameters for the meter.
Defines safety and operational symbols used on the meter and in the manual.
Details the meter's display, ranges, power, dimensions, and accessories.
Provides accuracy details for AC/DC voltage and current measurements.
Explains the meaning of various indicators and symbols displayed on the meter's LCD.
Identifies and labels the physical components and connection terminals of the clamp meter.
Step-by-step guide for measuring AC and DC current using the clamp.
Procedure for measuring AC and DC voltage using test leads.
Instructions for measuring resistance, emphasizing safety precautions.
How to perform a continuity test and interpret results, including beeper function.
Guide for testing diodes, including polarity identification and forward voltage readings.
Method for measuring signal frequency using test leads and terminals.
Procedure for measuring frequency by clamping the conductor.
Explains the functions of the Data Hold, Peak Hold, MAX/MIN, and REL buttons.
To Next Page
