2
II. Specification
General Specification:
Digital Display:
3 3/4 digits LCD display with maximum reading 3999
Analog Display:
42 segments fast analog bar display
Symbol and Scale range:
Adjust automatically according range and input signal.
Polarity:
When negative signal in apply to the tester,
will show.
Over Load:
When the signal larger than the maximum will be show
Sample Rate:
2 times/sec for digital data
20 times/sec for analog bar
Low Power Indication:
When the battery is under the proper operation range,
will appear on the LCD display.
Power Source: UM-4 or AAA 1.5V battery x 2.
Battery Life: 100 hr approx. (alkaline battery)
Auto Power Off:
If there is no key or dial operation for 30 minutes, the meter
will power itself off to save battery consumption.
Clamp opening size: 25mm
Dimension (L x W x H) :
193 x 50 x 28mm, 7.60 x 1.97 x1.1 inch
Weight: 230g, 8.11
OZ ( include battery)
Accessory:
Instruction Manual, Leather Case, Test lead, Battery 1.5Vx2
To Next Page
Loading...
