CONTENTS
TITLE PAGE
I. Introduction
…………………………………………………………………………….…..1
II. Specifications
……………………………………………………………………………
1
III. Symbol Definition and Button Location
……………………………….
2
IV. Operation Instructions
…………………………………………….………………
3
4.1 Power-Up…………………………………………………………………………………....3
4.2 Connection the Thermocouples………………………………………………………...3
4.3 Selecting the Temperature Scale……………………………………………………….
3
4.4 Data-Hold Operation………………………………………………………………………
3
4.5 DataLogger…………………………………………………………………………………
3
4.6 Clock Setup ………………………………………………………………………………..
3
4.7 Recording Interval Setup……..………………………………………………………….
4
4.8 Relative Operation………………………………………………………………………..
4
4.9 MAX/MIN Operation……………………………………………………………………….
4
4.10 Auto Power Off……………………………………………………………………………4
4.11 Low Battery Condition ………………………………………………………………….
4
4.12 Calibration Point…………………………………………………………………………
4
4.13 Digital Output……………………………………………………………………………..
5
V. Setup ThermoLog (Thermo DataLogger)—RS232 interface
software
………………………………………………………………………………………
7