Center 318 User Manual

318
Data Logger
HYGRO THERMOMETER
SE-318

Center 318 Specifications

General

Display	LCD
Waterproof	No
Resolution	0.1°C
Battery	1 x AAA battery
Auto Power Off	Yes (approx. 1 minute)

Summary

Safety Information and Environment

Device Specifications

Sensor Type

Operating Ranges

Resolution and Accuracy

Specifies measurement resolution and accuracy for different probes.

Buttons and Functions Overview

Display Symbols and Device Components

Power, Backlight, and Auto-Off Controls

Controls for powering the unit on/off, managing the LCD backlight, and auto power off.

Data Recording and Display Modes

Data Hold, Units, and PC Connectivity

Using Data Hold, selecting temperature units, PC interface, and power options.

Data Logger Operations

Setting Data Storing Interval Time

Configuring the time interval for data recording.

Starting and Stopping Data Logging

Initiating, stopping data recording, and important notes during the process.

Clearing Stored Data

Time and Power Management

Setting the Device Date and Time

Procedure for setting the device's internal clock and date accurately.

Battery Loading and Replacement

Connecting the AC Adapter

PC Communication and Software

Software Package and System Requirements

Details on SE318 software, system, and hardware needs for PC connection.

Software and Driver Installation Procedure

Step-by-step guide for installing SE318 software and its associated drivers.

Connecting and Verifying the Device

SE318 Software Interface and Data Viewing

Data Logger File Transfer and Troubleshooting