Center EHE0200154 - Programming the EHE0200154; The Built-in Heating Program; Reviewing the Heating Program; Modifying the Heating Program

9
Reviewing the Heating Program
To review or edit the heating program use the PROGRAM or buttons to navigate
between the 4 individual programming periods for that day. Use the DAY button to
stepthrougheachdayoftheweek,sothecomplete7dayheatingprogramcanbe
reviewed or edited.
Modifying the Heating Program
To change the heating program:
a.
Press either of the PROGRAM or buttons
to enter the programming mode. The time /
temperature settings for period
1
on Monday
(Day1)willbeashingasshown.Theactive
periodishighlightedbyaashingsquarearound
the numbers at the bottom of the screen and the
selected day is shown with the day indicator.
b. To adjust the period start time use the or buttons, the ‘OK?’ indicator will
be displayed to confirm the change. Holding the button down will change the time
quickly.
 Note:Ifyouarepressingthe
or buttons and the display flashes the next
period, it means the next period will be pushed forward.
c.Oncetherequiredtimeisreachedpressthe button to confirm.
Note: Iftheoriginaltimesettingdidnotrequireadjustmentpressthe button to
move to step ‘d’.
Mon T u e Wed Thu Fr i Sat Sun
4321
The Built-in Heating Program
The built-in heating program has 4 temperature level changes per day that can be set
between 3.00am and 2.50am the following day - allowing you to maintain the evening
temperatureaftermidnight.Eachtemperaturelevelcanbesetbetween5°Cand35°C,
andadjustedin0.5°Cincrements.Thefactorydefaultprogramforheatingisasfollows.
Programming the EHE0200154
Period 1 2 3 4
Time 6:30 8:00 18:00 22:30
Temperature 21°C 18°C 21°C 16°C
Period 1 2 3 4
Time 8:00 10:00 18:00 23:00
Temperature 21°C 21°C 21°C 16°C
Monday to Friday
(Day 1 to 5)
Saturday & Sunday
(Day 6 & 7)