To Next PageTo Next PageWhy Central Machinery 44506 Power Tool operates slowly?
If your Central Machinery Power Tool operates slowly, it might be due to an extension cord that is too long or has a wire size that is too small. Try eliminating the use of an extension cord. If an extension cord is necessary, use a shorter cord with a heavier gauge.
Why does the drill bit burn or smoke on my Central Machinery Power Tool?
If the drill bit burns or smokes while using your Central Machinery Power Tool, it could be due to: * Incorrect spindle speed. Change the spindle speed. * A dull drill bit. Replace it with a new one. * Drilling too slowly. Increase the drilling speed. * Lack of lubrication. Lubricate the cutting area.
Why does the drill bit wobble in my Central Machinery 44506 Power Tool?
If the drill bit wobbles in your Central Machinery Power Tool, possible causes include: * A bent bit. Replace the drill bit. * Worn Spindle Bearings. Replace the spindle bearings. * The drill bit is not correctly installed in the chuck. Reinstall the drill bit. * The chuck is not properly installed. Reinstall the Chuck and Arbor assembly.
General| Brand | Central Machinery |
|---|---|
| Model | 44506 |
| Category | Power Tool |
| Language | English |
