Central Machinery 35570 User Manual

MORTISING MACHINE
MODEL
35570
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
1996 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight
Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual
product may differ slightly from the product described herein. Tools required for assembly and service may not
be included.
For technical questions or replacement parts, please call 1-800-444-3353.

Central Machinery 35570 Specifications

General

Motor	1/2 HP
Voltage	120V
Speed	1720 RPM
Type	Bench Grinder
Wheel Diameter	8 inches

Summary

Important Safety Warning

Important Safety Precautions

Grounding Instructions

Voltage Warning

Extension Cords

Unpacking and Parts Check

Assembly Instructions

Operating Procedures

Attaching Chisels and Bits

Instructions for attaching chisels and bits to the mortising machine's chuck.

Mortising Process

Steps for performing mortising operations, including fence and clamp setup.

Creating Slots

Guidance on creating slots longer or wider than 1/2 inch by moving the wood.

Maintenance

Bit and Chisel Sharpening

Guidance on how to sharpen bits and chisels, and when to replace them.

Lubrication

Instructions for lubricating columns and gears for proper machine function.

Troubleshooting

Parts List

Parts Diagram

Limited 90 Day Warranty