To Next PageTo Next Page
Need help?Do you have a question about the Central Machinery 31849 and is the answer not in the manual?
General| Horsepower | 3/4 HP |
|---|---|
| Voltage | 120 V |
| Type | Bench Grinder |
| Motor | Induction |
| Speed Range | Single Speed |
| Wheel Diameter | 8 in |
| Arbor Size | 5/8 in |
Lists key technical details like motor, dimensions, speeds, and capacities.
Covers personal conduct, attire, and general safe operating practices.
Details essential conditions for the workspace to prevent hazards.
Outlines essential checks before operating the jointer, including tool condition and setup.
Explains proper grounding, voltage compatibility, and plug usage.
Provides specifications for selecting and using appropriate extension cords.
Details steps for unpacking, cleaning, and preparing components before assembly.
Guides through connecting stand components like side plates, roof, and chassis.
Details connecting the main jointer unit to the assembled stand.
Explains how to achieve correct belt tension by adjusting motor position.
Provides instructions for properly fitting the cutterhead guard.
Guides the assembly of the handle wheels for table adjustment.
Details the process of assembling the fence and its angle scale.
Covers essential rules for operating the jointer safely and effectively.
Explains how to raise and lower the infeed and outfeed tables.
Describes how to adjust the fence position and tilt angle.
Explains jointing and planing techniques and material limitations.
Guides on identifying and working with wood grain direction.
Details aligning knives with the outfeed table for precise cuts.
Covers fine-tuning knife height and parallelism for optimal performance.
Explains how to adjust table gibs for smooth movement.
Provides instructions for removing and installing new jointer knives safely.
Details the process of sharpening the jointer knives using abrasive stones.
Guides the installation and connection of the main power switch box.
Explains how to connect the motor and power cord wires correctly.
Describes the procedure for safely powering the jointer on and off.
Outlines essential cleaning and storage procedures post-operation.
Instructions for unpacking the jointer and verifying all parts are present.
Lists all components required for the stand assembly.
Provides a comprehensive list of parts for the jointer mechanism.
Illustrates the physical arrangement and numbering of stand parts.
Illustrates the physical arrangement and numbering of jointer parts.
A visual representation of the jointer's electrical wiring.
