Central Machinery 91762 User Manual

6-1/2 HP PLATE COMPACTOR
91762
SET UP, OPERATING, AND SERVICING
INSTRUCTIONS
Using an engine indoors CAN KILL YOU IN
MINUTES.
Engine exhaust contains carbon monoxide.
This is a poison you cannot see or smell.
NEVER use inside
a home or garage,
EVEN IF doors and
windows are open.
Only use OUTSIDE
and far away from
windows, doors,
and vents.
Distributed exclusively by Harbor Freight Tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93012
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2004 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of Harbor
Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements,
actual product may differ slightly from the product described herein.
For technical questions or replacement parts, please call 1-800-444-3353.

Central Machinery 91762 Specifications

General

Brand	Central Machinery
Model	91762
Category	Power Tool
Language	English

Summary

Product Introduction and Danger Warnings

Carbon Monoxide Hazard Warning

Warns about deadly carbon monoxide from engine exhaust.

General Safety Precautions

Read and Understand All Instructions

Stresses the importance of following all safety instructions.

Work Area and Personal Safety

Work Area Safety Guidelines

Personal Safety Practices

Details how to protect oneself during operation.

Tool Use and Care Guidelines

Safe Tool Operation and Service

Safe Operation Practices

Specific Safety Precautions

Label Maintenance and Hand Safety

Stresses maintaining labels and keeping hands clear of hazards.

Operational and Hazard Safety

Safe Operating Practices

Covers recommendations for safe use in various conditions.

Fire and Explosion Prevention

Details precautions against fire and explosion hazards.

Fuel, Fire, and Mechanical Safety

Fire and Explosion Precautions

Reinforces safety measures for flammable materials.

Mechanical Safety Checks

Outlines mechanical checks and precautions before operation.

Health and Environmental Precautions

Burn and Chemical Safety

Noise and Pacemaker Warnings

Vibration Hazard and Assembly

Vibration Hazard Reduction

Controls and Pre-Operation Checks

Product Controls Overview

Pre-Start Checks

Operating and Stopping Procedures

Engine Fuel and Oil Setup

Covers filling oil/fuel and starting the engine.

Stopping the Vibrator Plate

Inspection, Maintenance, and Cleaning

Routine Inspection and Cleaning

Lubricating the Grease Bearing

Maintenance Procedures

Belt Adjustment and Replacement