4
Never point any tool toward yourself or others.
Keep the exterior of the air compressor dry, clean,
and free from oil and grease. Always use a clean
cloth when cleaning. Never use brake fluids, gasoline,
petroleum-based products, or any strong solvents to
clean the unit. Following this rule will reduce the risk of
deterioration of the enclosure plastic.
SERVICE
Tool service must be performed only by qualified
repair personnel. Service or maintenance performed
by unqualified personnel may result in a risk of injury.
GENERAL SAFETY RULES
Disconnect the power supply, open the drain valve
to decompress the tank and allow water to drain,
and allow the air compressor to become cool to the
touch before servicing. Turn the pressure regulator
knob fully counter clockwise after shutting off the
compressor.
When servicing a tool, use only identical
replacement parts. Follow the instructions in
the Maintenance section of this manual. Use of
unauthorized parts or failure to follow the Maintenance
instructions may create a risk of injury.
To Next Page
Loading...
