Page 13For technical questions, please call 1-888-866-5797.Item 62913
SAFETYOPERATIONMAINTENANCE INSTALLATION
12. Close the in-line Shutoff Valve.
13. Bleed air from the tool then disconnect the tool.
14. Open the Drain Valve at the bottom of the Tank,
to release any built-up moisture
and the internal tank pressure.
15. Clean, then store the Air Compressor inside a garage or another
area that provides protection from the elements..
Emergency Depressurization
If it is necessary to quickly depressurize the Compressor, turn the Power Switch OFF.
Then, pull on the ring on the Safety Valve to quickly release stored air pressure.
12
13
14
To Next Page
Loading...
