What to do if my Central Pneumatic 60328 Air Compressor has nozzle leakage?
Nozzle leakage in your Central Pneumatic Air Compressor can occur due to a dirty nozzle. Try cleaning the nozzle. If the nozzle is worn or damaged, replace the nozzle and/or needle.
What to do if Central Pneumatic 60328 will not spray?
If your Central Pneumatic Air Compressor will not spray, check the air hoses. The cause may be no pressure at the airbrush.
How to fix poor paint atomization with Central Pneumatic 60328?
Poor paint atomization with your Central Pneumatic Air Compressor can occur due to several reasons: * Low paint level: Refill the paint. * Paint not properly thinned: Thin the paint. * Clogged Nozzle: Clean the nozzle. * Loose or damaged Needle: Adjust or replace the needle.
What to do if my Central Pneumatic 60328 Air Compressor has overspray?
Overspray with your Central Pneumatic Air Compressor, where paint drifts to unintended objects, can be due to: * Improper application speed: Move moderately and parallel. * Improper distance from workpiece: Adjust the distance.
General| Brand | Central Pneumatic |
|---|---|
| Model | 60328 |
| Category | Air Compressor |
| Language | English |
General safety instructions for fire, electric shock, and injury risks.
Safety guidelines specific to the operation of the air compressor.
Safety guidelines specific to the operation of the airbrush.
Procedures for inspecting, maintaining, and storing the compressor.
Procedures for inspecting and maintaining the airbrush.
To Next Page