Page 14 For technical questions, please call 1-800-444-3353. Item 60328
NOTICE
Clean the Airbrush IMMEDIATELY after use.
Delayed or inadequate cleaning will permanently clog the Airbrush.
SAFETY OPERATION MAINTENANCESETUP
Airbrush Maintenance
TO PREVENT SERIOUS INJURY:
Detach the air supply and safely discharge any residual air pressure in the airbrush before
performing any inspection, maintenance, or cleaning procedures, unless otherwise noted.
TO PREVENT INJURY:
Needles are very sharp. Use extreme caution when handling needles.
Inspection and Maintenance
Note: These procedures are in addition to the regular checks and maintenance
explained as part of the regular operation of the Compressor and air-operated tool.
1. BEFORE EACH USE, inspect the general
condition of the tool. Check for:
• bent needle,
• loose screws,
• misalignment or binding of moving parts,
• clogged nozzle,
• cracked or broken parts, and
• any other condition that may
affect its safe operation.
2. AFTER EACH USE, Clean Airbrush and
Jar according to following instructions.
Solvent Selection
Follow paint manufacturer’s
recommendations for cleaning, solvent type,
and disposing of used solvent.
WARNING! TO PREVENT FIRE,
IF A FLAMMABLE SOLVENT
NEEDS TO BE USED,
ADHERE TO THE FOLLOWING:
1. Follow solvent manufacturer’s clean up
instructions and safety precautions.
2. Flush Airbrush a full hose
length from Compressor.
3. If collecting flushed solvents in
metal container, transfer to nonmetal
container, and flush metal container.
4. Work far away from any ignition
sources in a vapor free area.
5. Keep class ABC fire extinguisher nearby.
To Next Page
Loading...
