Page 4SKU 94109 For technical questions, please call 1-800-444-3353
19. Only use Impact Sockets with this tool. Standard sockets will not withstand
the force applied by this tool, and may break, possible causing personal injury
and/or property injury.
20. Use only specied operating air pressure. Never operate tool above the
recommended working pressure of 100 PSI.
21. Do not use combustible gases. Do not use combustible gases as a power source,
or use tool in areas where combustible gases are stored.
22. OSHA Guidelines. Industrial applications must follow OSHA guidelines.
23. Air Compressor. Read and adhere to all warnings and instructions in the Air
Compressor Instruction Manual.
Warning: The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be under-
stood by the operator that common sense and caution are factors which cannot be
built into this product, but must be supplied by the operator.
Unpacking
When unpacking, check to make sure the components shown below are included. If any
parts are missing or broken, please call Harbor Freight Tools at the number on the cover of
this manual as soon as possible.
Side Handle (8)
Cap Screws (7)
Allen Wrench
Impact Wrench
To Next Page
Loading...
