EasyManua.ls Logo

Central Pneumatic 95310 - Functional Description and Setup; Read Safety Information Before Use; Unpacking Instructions

Central Pneumatic 95310
7 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SKU 95310 For technical questions, please call 1-800-444-3353. Page 6
5. When the nut has been tightened, remove the Impact Wrench and socket. Do not
over-tighten.
6. If available, check the recommended torque specifications for the nut. You should
use a torque wrench to torque the nut after using the Impact Wrench.
Maintenance
The Impact Wrench is best operated with an airline oiler. If you are using the Impact
Wrench without an airline oiler, perform the following maintenance:
Disconnect the Impact Wrench from the air hose. Apply a few drops of
pneumatic tool oil through the air line before each use, or every hour if used
continuously. Apply a few drops of oil to the Trigger mechanism. Work the
Trigger a few times to lubricate.
Note: Do not use detergent oil or additives as these lubricants will
cause accelerated wear to the tool’s seals.
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards,
and warrants to the original purchaser that this product is free from defects in materials and workmanship for the
period of one year from the date of purchase. This warranty does not apply to damage due directly or indirectly
to misuse, abuse, negligence or accidents; repairs or alterations outside our facilities; or to lack of maintenance.
We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or
consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS
WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid.
Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection
verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase
price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our
expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of
our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
LIMITED 1 YEAR
WARRANTY
WARRANTY

Other manuals for Central Pneumatic 95310

Related product manuals