To Next PageTo Next Page
Need help?Do you have a question about the Central Pneumatic 98733 and is the answer not in the manual?
General| Fastener Type | 18 gauge brad nails |
|---|---|
| Fastener Length | 3/8 in. to 2 in. |
| Magazine Capacity | 100 nails |
| Type | Brad Nailer |
| Air Inlet | 1/4 in. NPT |
General safety precautions, work area safety, personal safety, tool use, service, and air source requirements.
Covers warnings and precautions not covered elsewhere, including chemical exposures and PPE.
Advice on reducing risks associated with tool vibration exposure to minimize physical injury.
Details specifications, air supply requirements, and recommended air line components.
Steps for unpacking, checking for damage, and attaching the air connector to the nailer.
Guidance on testing safety mechanisms, loading nails, and operating the framing nailer.
Procedure for safely clearing nail jams from the tool, including necessary precautions.
Instructions for cleaning, lubrication, and general maintenance to ensure tool longevity and safety.
Identifies common problems, their possible causes, and recommended solutions for the tool.
A comprehensive list of all parts with their corresponding numbers for identification and ordering.
An illustrated diagram showing the exploded view of the tool and the placement of its parts.
Details the warranty coverage, limitations, and procedures for making a claim.
