Central Pneumatic Contractor Series User Manual

AIR FRAMING NAILER
8-10 GAUGE
ASSEMBLY and OPERATING
INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
For technical questions and replacement parts, please call 1-800-444-3353
Model 46240-B
Copyright
©
2003 by Harbor Freight Tools
®
. All rights reserved. No portion
of this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
REV 06/04 REV 11/04

Central Pneumatic Contractor Series Specifications

General

Brand	Central Pneumatic
Model	Contractor Series
Category	Nail Gun
Language	English

Summary

Specifications

Safety Warnings and Precautions

Use eye and ear protection

Always wear ANSI approved safety goggles and hearing protection for user safety.

Do not operate tool if under the influence of alcohol or drugs

Avoid operating tool if judgment or reflexes are impaired by alcohol or drugs.

Do not load nails with the trigger or safety depressed

Avoid unintentional firing by ensuring trigger/safety are not depressed when loading.

Stay within air pressure capacity

Never operate the Nailer above the maximum recommended air pressure.

Unpacking

Set Up

Testing the Full Sequential Safety Trip Mechanism

Use the Correct Type of Nails

Loading Nails

Operating the Nailer

Clearing Jams

Troubleshooting

Maintenance

Parts List

Assembly Diagram