EasyManua.ls Logo

CentraLine CLIOP831A User Manual

Default Icon
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
CentraLine I/O Modules
Installation &
Commissioning
Instructions
Copyright © 2019 Honeywell GmbH ● All Rights Reserved EN1Z-0973GE51 R0119
3.4
CentraLine
I/O MODULES
INSTALLATION AND COMMISSIONING INSTRUCTIONS
CONTENTS
Safety Information ............................................................... 2
General Safety Information ............................................. 2
Safety Information as per EN60730-1 ............................. 2
System Overview ................................................................ 3
System Architecture ........................................................ 3
CentraLine I/O Modules and Sockets ............................. 4
Interfaces and Bus Connections ..................................... 7
Technical Data ................................................................. 7
Planning ............................................................................... 8
Overview .......................................................................... 8
Transformer Selection ..................................................... 8
Fusing Specifications ...................................................... 9
System Protective Earth Grounding ................................ 9
Lightning Protection ......................................................... 9
Panel Bus Topologies ..................................................... 9
LONWORKS Bus Topologies ............................................. 9
Cable Specifications ........................................................ 9
Dimensions .................................................................... 11
Mounting/Dismounting Modules ..................................... 12
Mounting/Dismounting Modules / Sockets .................... 12
Mounting/Dismounting Electronic Modules ................... 14
Mounting/Dismounting Auxiliary Terminal Packages ... 14
Mounting/Dismounting Cross Connectors .................... 15
Mounting/Dismounting Swivel Label Holders ............... 15
Wiring and Setting up the System .................................. 16
General Safety Considerations ..................................... 16
Wiring Push-in Terminals .............................................. 16
Connecting Power Supply ............................................. 17
Connecting Single Bus Controller Systems .................. 17
Connecting Panel Bus and LONWORKS Bus Mixed
Controller Systems ........................................................ 18
Addressing Panel Bus I/O Modules .............................. 20
Connecting Field Devices ............................................. 20
Commissioning and Updating Firmware ....................... 21
Description of the CentraLine I/O Modules .................... 22
Common Features ......................................................... 22
Analog Input Modules .................................................... 22
Analog Output Modules ................................................. 27
Binary Input Modules ..................................................... 33
Relay Output Modules ................................................... 36
Floating Output Module ................................................. 41
Mixed Panel Bus I/O Modules ....................................... 45
Description of Extra Parts ................................................ 49
XS814 Auxiliary Terminal Package ............................... 49
XS830 Auxiliary Terminal Package ............................... 49
XS831 Auxiliary Terminal Package ............................... 49
XS815 Cross Connectors .............................................. 50
XAL10 Swivel Label Holders ......................................... 50
XAL11 Swivel Label Holders ......................................... 50
XS816 Bridge Connectors ............................................. 50
LonWorks Software Interface Description ...................... 51
Overview ........................................................................ 51
CLIOL821A Analog Input Module .................................. 51
CLIOL(R)822A Analog Output Module .......................... 53
CLIOL823A Binary Input Module ................................... 54
CLIOL(R)824A Relay Output Module ............................ 55
Troubleshooting ................................................................ 56
Testing Wiring Connections ........................................... 56
CentraLine I/O Module Troubleshooting ....................... 56
Appendix: Sensor Characteristics ................................... 60
BALCO 500 .................................................................... 60
NTC 20 k ..................................................................... 61
PT 1000 .......................................................................... 62
NI1000TK5000 ............................................................... 64
NTC 10 kΩ ..................................................................... 65
PT 3000 .......................................................................... 66
Johnson A99 PTC Thermistor ....................................... 67
Trademark Information
Echelon, LON, LONMARK, LONTALK, LONWORKS, Neuron, are
trademarks of Echelon Corporation registered in the United
States and other countries.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the CentraLine CLIOP831A and is the answer not in the manual?

CentraLine CLIOP831A Specifications

General IconGeneral
ModelCLIOP831A
CategoryControl Unit
Product typeProgrammable Controller
Digital inputs8
Digital outputs8
CommunicationBACnet MS/TP, Modbus RTU
Analog Inputs4
Analog Outputs2
Relative Humidity5 to 95% non-condensing
Dimensions110 x 90 x 60 mm
Operating Temperature-10 to 50 °C

Summary

Safety Information

General Safety Information

General safety precautions for installation and operation of the controller system.

Safety Information as per EN60730-1

Safety requirements and system data according to EN60730-1 standard.

Planning

Transformer Selection

Guidance on selecting appropriate transformers for the system.

Planning and System Setup

Fusing Specifications

Guidelines for selecting fuses for modules and devices.

Module Mounting and Dismounting

Mounting/Dismounting Modules and Sockets

Instructions for installing and removing modules and sockets.

Electronic Module and Auxiliary Package Handling

Mounting/Dismounting Electronic Modules

Instructions for installing and removing electronic modules.

System Wiring and Setup

General Safety Considerations

General safety rules for wiring and system setup.

Terminal Wiring Types

Wiring specifications for push-in and screw-type terminals.

Connecting Power Supply

Power Supply Connections

Connecting power supply, transformers, and DC supplies.

Wiring Examples

Controller Wiring

Wiring controllers without bridge connectors.

Mixed Bus System Wiring

Correct and incorrect wiring examples for mixed bus systems.

Addressing and Field Device Connection

Addressing Panel Bus I/O Modules

Assigning unique addresses to Panel Bus I/O modules.

Commissioning and Firmware Updates

Commissioning I/O Modules

Process for commissioning Panel Bus and LONWORKS I/O modules.

CentraLine I/O Module Description

Analog Input Modules

Types, descriptions, and housing of analog input modules.

Analog Input Module Details

Terminal Assignment

Description of analog input module terminals and internal connections.

Analog Input Wiring Examples

Active Sensor and Potentiometer Wiring

Wiring example for active sensor and potentiometer.

Analog Input Wiring Example 2

Passive Sensor and 0-20 mA Signal Wiring

Wiring example for passive sensor and 0-20 mA signal.

Analog Output Modules

Analog Output Wiring Example

CLIOP822A Analog Output Module Wiring

Wiring example for CLIOP822A analog output module.

Relay Module Connection Example

Connection with MCD 3 Relay Module

Wiring example using the MCD 3 relay module.

Connection with MCE 3 Relay Module

Wiring example using the MCE 3 relay module.

Binary Input Modules

Binary Input Wiring Example

CLIOP823A Binary Input Module Wiring

Wiring example for CLIOP823A binary input module.

Relay Output Modules

Module Types and Terminal Sockets

Lists relay output modules and their terminal sockets.

Relay Output Wiring Example

CLIOP824A Relay Output Module Wiring

Wiring example for CLIOP824A relay output module.

Relay Blocks with Voltage Wiring

Floating Output Module Details

Terminal Assignment and LED Behavior

Floating Output Wiring Example

CLIOPR825A Floating Output Module Wiring

Mixed Panel Bus I/O Module Specifications

Terminal Description

Module Specifications

Mixed I/O Module Wiring Example

CLIOP830A Mixed I/O Module Wiring

CLIOP831A Mixed I/O Module Wiring

LonWorks Software Interface

Overview and LonTalk Protocol

Addressing, Binding, and Commissioning

CLIOL821A Analog Input Module

LonWorks Analog Output Module

CLIOL(R)822A Module Details

LonWorks Output Feedback and Input

Binary Input Module

LonWorks Relay Output Module

CLIOL(R)824A Module Details

Troubleshooting

Testing Wiring Connections

CentraLine I/O Module Troubleshooting

General troubleshooting for CentraLine I/O modules.

Power LED Behavior

Service LED Troubleshooting

Service LED Troubleshooting

Meaning and remedies for Service LED states.

Module LED Tests and Analog Input Troubleshooting

LED Test for Pluggable Modules

Analog Input Module Troubleshooting

Troubleshooting specific failures for analog input modules.

Troubleshooting for Other Module Types

Output Module Troubleshooting

Troubleshooting failures for analog, binary, relay, and floating output modules.

Related product manuals