Do you have a question about the CentraLine CLIOP821A and is the answer not in the manual?
General safety instructions for installation, mounting, and operation.
Safety information according to EN60730-1 standard.
Guidance on selecting appropriate transformers.
Guidelines for selecting fuses for I/O modules and field devices.
Steps for mounting electronic modules.
Steps for dismounting electronic modules.
General safety considerations for wiring.
Wiring instructions for push-in and screw-type terminals.
How to connect the power supply to the system.
Correct and incorrect wiring examples for mixed bus systems.
How to address Panel Bus I/O modules using HEX switches.
Details on Analog Input Modules.
Terminal assignments and internal connections for analog input modules.
Technical data and accuracy for analog input modules and sensors.
Wiring example for analog input module with active sensor.
Wiring example for analog output modules.
Wiring example for CLIOP824A with line voltage.
Technical data, fast totalizer configuration, and LED behavior.
Wiring examples for CLIOP823A binary input module.
Types, features, and terminal assignments for relay output modules.
Detailed terminal descriptions and permissible loads for relay outputs.
Specifics of CLIOL(R)822A Analog Output Module.
Specifics of CLIOL823A Binary Input Module.
Specifics of CLIOL(R)824A Relay Output Module.
Testing wiring connections and general I/O module troubleshooting.
Troubleshooting common failures of analog input modules.
Troubleshooting common failures for analog, binary, relay, and floating outputs.
General safety instructions for installation, mounting, and operation.
Safety information according to EN60730-1 standard.
Guidance on selecting appropriate transformers.
Guidelines for selecting fuses for I/O modules and field devices.
Steps for mounting electronic modules.
Steps for dismounting electronic modules.
General safety considerations for wiring.
Wiring instructions for push-in and screw-type terminals.
How to connect the power supply to the system.
Correct and incorrect wiring examples for mixed bus systems.
How to address Panel Bus I/O modules using HEX switches.
Details on Analog Input Modules.
Terminal assignments and internal connections for analog input modules.
Technical data and accuracy for analog input modules and sensors.
Wiring example for analog input module with active sensor.
Wiring example for analog output modules.
Wiring example for CLIOP824A with line voltage.
Technical data, fast totalizer configuration, and LED behavior.
Wiring examples for CLIOP823A binary input module.
Types, features, and terminal assignments for relay output modules.
Detailed terminal descriptions and permissible loads for relay outputs.
Specifics of CLIOL(R)822A Analog Output Module.
Specifics of CLIOL823A Binary Input Module.
Specifics of CLIOL(R)824A Relay Output Module.
Testing wiring connections and general I/O module troubleshooting.
Troubleshooting common failures of analog input modules.
Troubleshooting common failures for analog, binary, relay, and floating outputs.
| Product type | Control Unit |
|---|---|
| Supply voltage | 24 V AC/DC |
| Digital inputs | 8 |
| Digital outputs | 8 |
| Input Voltage | 24 V AC/DC |
| Number of Digital Inputs | 8 |
| Number of Analog Inputs | 0 |
| Number of Digital Outputs | 8 |
| Number of Analog Outputs | 0 |
| Relative Humidity | 5% to 95% (non-condensing) |
| Communication Protocol | Modbus RTU |
| Communication | RS485 |
Loading...