CentraLine CLIOP822A - User Manual

CentraLine I/O Modules
Installation &
Commissioning
Instructions
Copyright © 2019 Honeywell GmbH ● All Rights Reserved EN1Z-0973GE51 R0119
3.4
CentraLine
I/O MODULES
INSTALLATION AND COMMISSIONING INSTRUCTIONS
CONTENTS
Safety Information ............................................................... 2
General Safety Information ............................................. 2
Safety Information as per EN60730-1 ............................. 2
System Overview ................................................................ 3
System Architecture ........................................................ 3
CentraLine I/O Modules and Sockets ............................. 4
Interfaces and Bus Connections ..................................... 7
Technical Data ................................................................. 7
Planning ............................................................................... 8
Overview .......................................................................... 8
Transformer Selection ..................................................... 8
Fusing Specifications ...................................................... 9
System Protective Earth Grounding ................................ 9
Lightning Protection ......................................................... 9
Panel Bus Topologies ..................................................... 9
LONWORKS Bus Topologies ............................................. 9
Cable Specifications ........................................................ 9
Dimensions .................................................................... 11
Mounting/Dismounting Modules ..................................... 12
Mounting/Dismounting Modules / Sockets .................... 12
Mounting/Dismounting Electronic Modules ................... 14
Mounting/Dismounting Auxiliary Terminal Packages ... 14
Mounting/Dismounting Cross Connectors .................... 15
Mounting/Dismounting Swivel Label Holders ............... 15
Wiring and Setting up the System .................................. 16
General Safety Considerations ..................................... 16
Wiring Push-in Terminals .............................................. 16
Connecting Power Supply ............................................. 17
Connecting Single Bus Controller Systems .................. 17
Connecting Panel Bus and LONWORKS Bus Mixed
Controller Systems ........................................................ 18

Addressing Panel Bus I/O Modules .............................. 20
Connecting Field Devices ............................................. 20
Commissioning and Updating Firmware ....................... 21
Description of the CentraLine I/O Modules .................... 22
Common Features ......................................................... 22
Analog Input Modules .................................................... 22
Analog Output Modules ................................................. 27
Binary Input Modules ..................................................... 33
Relay Output Modules ................................................... 36
Floating Output Module ................................................. 41
Mixed Panel Bus I/O Modules ....................................... 45
Description of Extra Parts ................................................ 49
XS814 Auxiliary Terminal Package ............................... 49
XS830 Auxiliary Terminal Package ............................... 49
XS831 Auxiliary Terminal Package ............................... 49
XS815 Cross Connectors .............................................. 50
XAL10 Swivel Label Holders ......................................... 50
XAL11 Swivel Label Holders ......................................... 50
XS816 Bridge Connectors ............................................. 50
LonWorks Software Interface Description ...................... 51
Overview ........................................................................ 51
CLIOL821A Analog Input Module .................................. 51
CLIOL(R)822A Analog Output Module .......................... 53
CLIOL823A Binary Input Module ................................... 54
CLIOL(R)824A Relay Output Module ............................ 55
Troubleshooting ................................................................ 56
Testing Wiring Connections ........................................... 56
CentraLine I/O Module Troubleshooting ....................... 56
Appendix: Sensor Characteristics ................................... 60
BALCO 500 .................................................................... 60
NTC 20 k ..................................................................... 61
PT 1000 .......................................................................... 62
NI1000TK5000 ............................................................... 64
NTC 10 kΩ ..................................................................... 65
PT 3000 .......................................................................... 66
Johnson A99 PTC Thermistor ....................................... 67
Trademark Information
Echelon, LON, LONMARK, LONTALK, LONWORKS, Neuron, are
trademarks of Echelon Corporation registered in the United
States and other countries.

Summary

Safety Information

General Safety Information

Covers general safety precautions, warnings, and recommendations for installation and operation.

Safety Information as per EN60730-1

Lists system data, pollution degree, voltage categories, and compliance with EN60730-1.

System Overview

System Architecture

Describes the overall controller system architecture, including connections between components.

CentraLine I;O Modules and Sockets

Module Types and Terminal Sockets

Details pluggable and mixed I/O modules, terminal sockets, and color coding for identification.

System Interfaces and Connections

Interfaces and Bus Connections

Describes Panel Bus and LONWORKS bus interfaces and their characteristics.

Planning and Power Supply

Planning Overview

Transformer Selection

Guides on selecting appropriate transformers based on voltage and VA requirements.

Power Supply Requirements

Details current requirements for I/O modules and available power supply options.

Module Mounting and Dismounting

Mounting;Dismounting Modules and Sockets

Instructions for mounting and dismounting modules and terminal sockets.

Dismounting Procedures

Electronic Modules and Terminal Packages

Mounting;Dismounting Electronic Modules

Instructions for installing and removing electronic modules from terminal sockets.

Auxiliary Terminal Packages

Wiring and System Setup

General Safety Considerations

Safety rules and precautions for electrical work and connections.

Terminal Wiring

Wiring specifications for push-in and screw-type terminals.

Power Supply Connections

Connecting Power Supply

Instructions for connecting external transformers or DC power supplies.

Controller and I;O Module Wiring

Wiring for single bus systems and modules on multiple rails.

Mixed Systems Wiring

Connecting Panel Bus and LONWORKS Bus Mixed Controller Systems

Addressing and Field Devices

Addressing Panel Bus I;O Modules

Instructions for setting unique addresses for Panel Bus I/O modules using HEX switch.

Connecting Field Devices

Commissioning and Firmware Updates

Commissioning I;O Modules

Procedures for commissioning Panel Bus and LONWORKS Bus I/O modules.

Updating Software

I;O Module Descriptions

Analog Input Modules

Details on types, housing, and features of analog input modules.

Analog Input Module Technical Data

Terminals and Technical Data

Terminal assignments and technical specifications for analog input modules.

Analog Input Wiring Examples

Wiring Example 1 (Active Sensor)

Wiring Example 2 (Passive Sensor;Current)

Analog Output Modules

Analog Output Technical Data and Behavior

Status LED and Manual Override Behavior

Analog Output Wiring Example

Analog Output Connection Example

Binary Input Modules

Binary Input Technical Data and Configuration

Technical Data

Specifications for binary input modules, including input type and protection.

Configuration as Fast Totalizer

Binary Input Wiring Example

CLIOP823 A Connection Examples

Relay Output Modules

Module Types and Features

Lists relay output modules, their housing, and key features.

Relay Output Terminal Data

Terminal Description and Permissible Loads

Details terminal assignments and permissible loads for relay outputs.

Relay Output Manual Override Behavior

Manual Override Modes

Relay Output Wiring Example

CLIOP824 A Connection Example

Floating Output Module

Floating Output Terminal Data and Behavior

Terminals and LED Behavior

Manual Override Behavior

Floating Output Wiring Example

CLIOPR825 A Connection Example

Mixed Panel Bus I;O Modules

Features and Permissible Loads

Details features, housing, and permissible loads for mixed I/O modules.

Mixed I;O Module Terminals and Specifications

Terminal Description

Mixed I;O Module Wiring Examples

CLIOP830 A Connection Example

CLIOP831 A Connection Example

LonWorks Software Interface

Overview and Protocol

General overview of the LonWorks interface and LonTalk protocol.

CLIOL821 A Analog Input Module

Analog Output Network Variables

Analog Output Control Level

Relay Output Command

Relay Output Command Variable

Troubleshooting Overview

Testing Wiring Connections

Procedure for testing wiring connections using test points.

CentraLine I;O Module Troubleshooting

General troubleshooting steps for I/O modules, including LED checks.

Power LED Behavior

Interpretation of the Power LED status and associated remedies.

Service LED Behavior

Service LED Status

Interpretation of Service LED status for various module types.

LED Test Procedure

Module-Specific Troubleshooting

Analog Input Modules Troubleshooting

Specific failure modes and remedies for analog input modules.

Analog Output, Binary Input, Relay, and Floating Output Troubleshooting

Specific failure modes and remedies for various output and input modules.

CentraLine CLIOP822A Specifications

General

Outputs	8 relay outputs
Relative Humidity	5% to 95% non-condensing
Enclosure Rating	IP20
Certifications	CE, UL
Series	CLIOP800
Inputs	8 digital inputs
Power Supply	24 VAC/DC