N
E
NOTE
Reception can be affected by a number of factors. For best reception, place the
device away from metal objects and electrical appliances. Other causes for signal in-
terference
include electrical transmission towers, steel reinforced construction, and
metal siding. Reception is ideal when placed near a window.
NOTE
Even though there are areas that may have more difficulty in receiving a signal,
the
Atomic Clock contains accurate quartz movement and will retain precise timing
even if the signal is missed on a rare occasion.
ENABLING / DISABLING RADIO RECEPTION
To manually disable the reception of the RF signal, press and hold the [DOWN ]
button for 2 seconds until the Radio Reception symbol completely disappears.
To enable the reception again, press and hold [UP ] button for 2 seconds. The
Radio Reception symbol will blink and the unit will search for the RF signal
automatically.
TO MANUALLY SET THE CLOCK AND CALENDAR
6
Instructions
2. Enter the value by pressing the [UP ] or [Down ] buttons.
3. Confirm the entry by pressing the [MODE] button. The 12- or 24-hour display
format will blink.
4. Repeat (2) and confirm the entry by pressing the [MODE] button.
5. Repeat the above procedures to set the hour, minute, year, month, day and
language
for day-of-week. You can select among English (E), German (D),
French (F), Italian (I) or Spanish (S).
1.
Press and hold the [MODE] button for 2 seconds. The time-zone offset hour digits will
blink
. The default value of offset hour is -8 (US Pacific Time). To change to a different
US time-zone, please set the o
ffset hour as follow:
-7 = Mountains
Time
-6 = Central
Time
-5 = Eastern
Time
Before you can manually set the clock and calendar, you must specify the current
time zone you live in and the time format (12- or 24-hour).
To Next Page