Need help?Do you have a question about the CENTURION SYSTEMS V Series and is the answer not in the manual?
General| Model | V Series |
|---|---|
| Category | Gate Opener |
| Operating Voltage | 24V DC |
| Protection Rating | IP54 |
| Motor Type | DC |
| Maximum Gate Width | 6 meters |
| Opening Speed | Adjustable |
| Closing Speed | Adjustable |
| Control Options | Remote Control, Keypad |
Critical safety instructions and precautions for installers before commencing work on the product.
Details on the surge protection philosophy and the importance of proper earthing for the V-Series Controller.
Guidelines for mounting the V-Series Wall Box securely and in an accessible location.
Procedure for connecting all necessary cables to the V-Series Controller.
Procedure for setting the electronic limits for inward and outward opening swing gates.
Table detailing the fuses provided on the system for the main controller, light circuit, auxiliary supply, and charger.
Menu option for configuring the gate's opening and closing limits.
Menu options for configuring safety features like collision force and count.
Menu options for configuring automatic closing features, including status, timer, and override.
Selection and configuration of different gate operating modes: Standard, Condominium, or Reversing.
Menu options for configuring run profiles, including positive close and open modes.
Menu options for configuring safety beams, including PIRAC control and beam tests.
Configuration of collision detection sensitivity and multiple collision counting for safety.
Settings for the automatic gate closing feature, including status, timer, and override options.
Selection and configuration of different gate operating modes: Standard, Condominium, and Reversing.
Configuration of the Positive Close Mode (PCM) for secure gate locking at the endstop.
Configuration of the Positive Open Mode (POM) for smooth gate opening without collision activation.
Setting the delay for one gate leaf to move before the other, common in double leaf installations.
Delay before the gate commences opening movement after a trigger signal.
Delay before the gate commences closing movement after a trigger signal or autoclose.
Setting the maximum piston opening speed in millimeters per second.
Setting the maximum piston closing speed in millimeters per second.
Settings for safety beams, including placement and functionality for opening and closing.
Configures the Passive-Infrared Autoclose feature to automatically close the gate after passage.
Automatic testing of safety beams before each gate cycle for system integrity.
Configures the Opening Beam to act as a Closing Beam when gates are closing.
Settings for IR beam alarms, including Ambush, Break-in, and alarm output configurations.
Default parameter settings for the South African Standard Profile (ZA).
Default parameter settings for the CE Standard Profile.
Default parameter settings for the UL325 Standard Profile.
Table detailing the meaning of different LED flash patterns for gate status indication.
Explanation of information displayed on the LCD screen, including battery, mains, and status indicators.
Table detailing buzzer feedback for various fault types and system conditions.
To Next Page
