Century 2000 - VOR APPROACH STEPS (CONTINUED)

VOR Approach
Step 6. HDG/ATT or ALT.
Proceed outbound until
sufficient time as elapsed
before starting the turn
inbound.
Step 7. HDG/ATT or ALT.
Lead the aircraft through the
procedure turn by moving the
heading bug.
Step 8. HDG/ATT or ALT.
As the aircraft turns, move
the heading bug to the
desired heading to intercept
the inbound course.
Step 9. NAV/ATT or ALT.
Press the NAV button and
turn the heading bug to the
inbound course (same as the
OBS). The autopilot will set
up a 45° intercept angle.
Step 10. NAV/ATT or ALT.
The autopilot will anticipate
the on course turn. After
intercept it will correct for
crosswind, limit bank angles
and adjust it’s radio gain.
Control pitch as necessary
for the approach.
VOR Approach
Step 11. HDG/ATT.
Once the aircraft has
reached the decision height,
disconnect the autopilot and
continue the approach or
conduct the missed
approach. For the missed
approach, establish the
aircraft’s attitude and
airspeed then turn the
heading bug to the missed
approach heading. Re-
engage the autopilot and
monitor aircraft’s
environment.
61
60