Localizer Back Course Localizer Back Course
Step 6. REV/ATT or ALT.
As the aircraft continues to
turn, set the heading bug to
the inbound procedure turn
heading. Press the REV
switch. The autopilot will set
up a 45° intercept.
Step 7. REV/ATT. After the
on course turn is completed,
the system will enter the “soft
track” mode to limit radio
authority and bank angles and
to correct for crosswind.
Control altitude and airspeed
as appropriate for the
approach.
Step 8. REV/ATT. Once the
aircraft has reached
minimums, disconnect the
autopilot. If a missed
approach is required,
disconnect the autopilot and
establish desired climb
attitude and airspeed. When
appropriate press HDG and
ATT or ALT and engage
autopilot.
71
72
To Next Page
Loading...