Need help?Do you have a question about the Century A-VMH36SD-1 and is the answer not in the manual?
Instructions to prevent injury and property damage, and warnings for correct operation.
Critical warnings for safe installation including electrical, structural, and environmental.
Steps for initial installation, leak checking, and system evacuation using a vacuum pump.
Detailed procedure for purging air from the system using a vacuum pump.
Procedures for re-installing indoor or outdoor units after repair.
Steps for charging the system with refrigerant after installation or repair.
Details on compressor protection against high temperatures and restarts.
Functionality and protection related to temperature sensors and refrigerant leakage.
Lists error codes (E0-E5, EC, F0-F5, P0-P4, P6) and their associated LED statuses.
Guidance for garbled codes or unrecognized error codes and basic troubleshooting.
Table correlating LED indicators (LED3, LED2) with problems and IU display codes.
Method and expected resistance values for checking compressor windings.
General| HSPF | 8.5 |
|---|---|
| Cooling Capacity | 36000 BTU/h |
| Heating Capacity | 36000 BTU/h |
| Refrigerant | R410A |
| Power Supply | 208/230V, 1Ph, 60Hz |
To Next Page
