EasyManua.ls Logo

Ceridian Dayforce Tuff Clock - Battery Storage and Safety; Step-by-Step Battery Installation

Ceridian Dayforce Tuff Clock
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DF Tuff
Page 8 of 31
7.1.2 Storage and Safety Information for the L18650-2ACR
Battery
Do not crush, puncture, incinerate, short-circuit, disassemble, immerse
in water, expose to strong mineral oxides, or heat the battery over 60
degrees Celsius. Exposure to battery contents may be harmful. In case
of eye exposure, flush with water for 15 minutes without rubbing and
seek medical attention. In the case of skin exposures, wash affected
area with liberal amounts of water for at least 15 minutes and seek
medical attention.
When not in use, store batteries between -20 degrees Celsius and 35
degrees Celsius. In case of fire, use CO2, dry chemical powder, or
alcohol resistant foam extinguishers.
7.1.3 Installing or Removing the L18650-2ACR Battery
The L18650-2ACR Battery resembles the figure below:
L18650-2ACR Battery Pack
The battery kit that comes with the clock includes the battery, the
battery cover, the battery cable, and two screws, as shown in the
following image:

Related product manuals