EasyManua.ls Logo

Ceridian Dayforce Tuff Clock - Battery Pack Installation; L18650-2 ACR Battery Instructions; Battery Disposal Guidelines

Ceridian Dayforce Tuff Clock
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DF Tuff
Page 7 of 31
Terminal uses a web service to synchronize its time with
Dayforce servers.
6.16 Dimensions (Approximate)
11 in (28cm) wide
6.75 in (17cm) high
4.5 in (7.5cm) deep including angled wall-mount
Weight about 4.4 lbs (2Kg) with packaging
7 BATTERY PACK INSTALLATION INSTRUCTIONS
Disclaimer: These instructions are for battery pack model L18650-2ACR,
manufactured by Fedco Batteries. Use of any other battery is not covered by
this document is potentially hazardous and will void the Dayforce Clock
warranty.
7.1 L18650-2ACR Battery Instructions
This product may be supplied with a rechargeable Lithium Ion battery.
The following are important safety instructions for using, storing, and
disposing of the battery.
7.1.1 Disposal for Li-Ion Battery Pack
The rechargeable battery contains the following components that must
be disposed of in accordance with local regulations: Lithium Ion cells.
Caution: When the battery is worn out, insulate the connector terminals
with adhesive tape or similar material before disposal.
Misuse or improper disposal of the battery pack may cause the battery
to become very hot, ignite, or explode. When disposing of a battery
pack, contact your local waste disposal service provider regarding local
restrictions on the disposal and recycling of batteries.

Related product manuals