C.E.S. Model SDI-50 Manual, Level Adjustments
NUMBERS TO BE RESTRICTED *5
____________
ON OFF_________
*5 06 1 O NUMBER 1
*5 05 1 O NUMBER 2
*5 04 1 O NUMBER 3
*5 03 1 O NUMBER 4
*5 02 1 O NUMBER 5
*5 01 1 O NUMBER 6
*5 00 1 O NUMBER 7
*5 10 1 O NUMBER 8
*5 11 1 O NUMBER 9
*5 07 1 O NUMBER O
Example: To have the numeral "1" toll restricted enter the following
sequence:
*5 (tone) 06 (tone) 1 (tone)
To have the numeral "9" restricted enter this sequence:
*5 (tone) 11 (tone) 1 (tone)
Restricted Digits (*5 15,16)
Numbers which were flagged by the switches 00 through 11 will be
restricted as the first dialed digit by using Program Code "*5 15".
Use Code "*5 16" for the second dialed digit.
Restrict Program
From__________________Sequence
First digit ON "*5 15 1"
First digit OFF "*5 15 O"
Second digit ON "*5 16 1"
Second digit OFF "*5 16 O"
Example: To restrict the "flagged" numerals from being the first
digit dialed, but allow it as the second, enter this sequence:
*5 (tone) 15 (tone) 1 (tone)
*5 (tone) 16 (tone) O (tone)
6.5.2
Selectivo Signalling (*5 12)
This Program Code Enables DTMF selective signalling to the
mobiles by "overdialing" a DTMF ANI code from the telephone.
Auto Answer (*5 35) must also be turned on for this to work.
The Ínterconnect will answer on the
Page #26
To Next Page
Loading...