EasyManua.ls Logo

CES SDI-50 - Model SDI-50 General Description; 2.1 Features

Default Icon
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
C.E.S. Model SDI-50 Manual
MODEL SDI-50 GENERAL DESCRIPTION
The CES Model SDI-50 Programmable Interconnect is a fully automatic
microprocessor controlled telephone interconnect for use in
land/mobile radio systems. The Model SDI-50 is designed as an
interface controller between the Public Switched Telephone Network and
land/mobile radio base station equipment. This interface allows
mobile radios to originate and receive telephone calis from the Public
Switched Telephone Network when the mobile is equipped with a standard
DTMF encoder for interconnect control. The CES Model SDI-50 is
capable of operating fuli dúplex, half dúplex or simplex.
2.1
FEATURES:
* Remotely programmable from any DTMF telephone for convenience.
* Single "*" and "^" connect and disconnect codes for simplicity.
* Programmable multi-digit connect and disconnect codes for system
security.
* Regenerated DTMF or pulse dialing into the telephone
network.
* Intelligent, prograinmable toll restriction suitable to your
application.
* Programmable call limit and mobile activity timers to help control
system loading.
* Time out warning signals before automatic disconnection.
* Morse code station identifier.
* Busy channel transmit lock out.
* Múltiple relay contad closures for custom applications.
* Repeater controller capability with programmable transmitter hang
time and time out timer makes the SDI-50 an inexpensive back-up unit.
* Regenerated DTMF land line to mobile selectivo signaling for
confidence in any network.
* Dial-up remote dispatch for simplex or repeater applications
eliminates costiy DC or tone remotes.
The Model SDI-50 is programmed by DTMF tones from any DTMF telephone
for "remote" programming, or by the DTMF encoder supplied with the
SDI-50 for "local" programming. Programming the Model SDI-50 allows
the unit to be customized to suit the particular requirements of your
interconnected system. All programming data is stored in an EEPROM
that maintains data integrity without power for a mínimum of 100
years.
Page # 3

Table of Contents