Product details
Product guide – CESAB S200
37
Feature
It is possible to adapt the settings for speed, acceleration and braking characteris-
tics to the application, the operator's level of experience and/or preferences. The
truck can store up to ten different settings.
Benet
By adapting the truck to the operator and/or the application damage caused by
inexperienced operators can be reduced while maximum productivity can be achie-
ved with experienced operators.
Machine register and service parameters
It is possible to see machine-specic settings in this register, e.g. to conrm service
parameters, however, it is not possible to make changes in the register. An example
of service parameters are: service interval (time interval when the truck signals ser-
vice is required), automatic switch-off, battery type settings (to achieve optimum
battery discharge), and creep speed.
Proceed as follows to conrm settings in the operator and machine-specic regis-
ter:
Press the horn button and keep it pressed while starting the truck using PIN code
entry.
The display then shows the various functions:
Operating hours and time remaining until next service (H)
Error codes (E)
Parameters (P)
Hardware and software version numbers (Pn)
Release the horn button at the required display.
To scroll between the settings for each mode, turn the speed control.
●
●
●
To Next Page
Loading...
Need help?
General
