Cessna A185F 1976 User Manual

1976 Cessna A185F Seaplane N185AS
Airspeeds
Vs0 41*- 40 degrees flaps
Vs1 55
Vx 80
Vy 90
Vfe 120
Va 118
Vno 146
Vne 182
Best Glide 80
*All speeds in Knots
Engine Specs
Continental IO520 D (Horizontally Opposed, 6 cylinder, Air Cooled)
300 HP @ 2850 RPM
Max RPM- 2850 RPM
Oil Type: Phillips X/C 20W50 or W100 Aeroshell
Max oil Capacity: 12 U.S. Quarts
Normal Operations: 9-10 U.S. Quarts
Propeller Specs
Manufacturer: McCaulley
Prop Type: Constant Speed
Number Blades: 2
Prop Diameter: 86
Fuel
Capacity: 80 U.S. gallons – 40 each wing
Usable: 74 U.S. gallons
Fuel Burn: 16 Gallons Per Hour (average)
Fuel Type: 100/130 Aviation fuel or 100 LL

Cessna A185F 1976 Specifications

General

Brand	Cessna
Model	A185F 1976
Category	Tools
Language	English

Summary

Preflight and Engine Procedures

Preflight Inspection

Standard walk-around inspection covering fuel, oil, lights, controls, and propeller.

Engine Starting Procedures

Ensuring quick exit by securing seatbelts and preparing the engine before startup.

Takeoff and Climb Procedures

Normal Takeoff and Climb

Rough Water Takeoff and Climb

Glassy Water Takeoff and Climb

Approach and Landing Procedures

Normal Approach and Landing

Landing checklist (GUMPS) and procedures for downwind, base, and final legs, including touchdown.

Rough Water Approach and Landing

Procedures for rough water landings, covering downwind, Abeam, Base Leg, Final, and After Touchdown.

Glassy Water Approach and Landing

Techniques for landing on glassy water, emphasizing pitch attitude, airspeed, and power settings.

Confined Area Approach and Landing

Emergency and Sailing Procedures

Forced Landing

Steps for engine failure, including troubleshooting and site selection for emergency landings.

Water Landing

Turf Landing