Cessna 510 Mustang User Manual

ISSUE 02 , JAN 2018 FOR TRAINING PURPOSES ONLY
CESSNA Model 510 Structural Repair Manual (Rev 2) EXTRACT
• Chapter 51 Standard Practices – Structures
Cessna 510 Mustang (PW 615)
THIS STRUCTURAL REPAIR TRAINING MANUAL HAS BEEN PRODUCED AS AN INSTRUCTION AID
IN SUPPORT OF TECHNICAL GROUND INSTRUCTION. NO AMENDMENTS ARE PROVIDED AFTER
ISSUE. THEY SHOULD ONLY BE USED AS A STUDY GUIDE. THE NOTES MAY NOT BE USED FOR
THE PURPOSE OF AIRCRAFT MAINTENANCE: PLEASE REFER TO THE MANUFACTURERS OFFICIAL
PUBLICATIONS.
FOR TRAINING USE ONLY

Cessna 510 Mustang Specifications

General

Category	Business jet
Manufacturer	Cessna
Crew	1 or 2
Capacity	4 passengers
Length	40 ft 7 in (12.37 m)
Wingspan	43 ft 2 in (13.16 m)
Height	13 ft 5 in (4.09 m)
Service ceiling	41, 000 ft (12, 500 m)
Rate of climb	3, 010 ft/min (15.3 m/s)
Powerplant	2 × Pratt & Whitney Canada PW615F turbofans
Cruise speed	340 knots (630 km/h; 390 mph)
Range	1, 343 mi (2, 161 km, 1, 167 nmi)

Summary

Standard Practices – Structures

Structures Overview

General overview of structural systems, elements, identification, and aerodynamics.

Damage Reporting and Classification

Procedures for reporting major damage and classifying cracks, corrosion, etc.

Material and Fastener Procedures

Guidance on protective treatments, materials, fasteners, and hole preparation.

Control Surface Balancing

Procedures for balancing ailerons, elevators, and rudders.

Repair Techniques

Methods for general repairs, skin repairs, composite repairs, and dent removal.