Operator’s Manual Addendum
Notices and Compliance Declarations
AD-4
Pinch point on X, Y, Z axis movement.
Attention – refer to the manual. This symbol
indicates that information about usage of a
feature is contained in the manual.
WARNING
If the auto sampler is used in a manner not specified by CETAC
Technologies, the protection provided the equipment may be
WARNING
The power switch on the rear panel is not the mains disconnect.
Mains disconnect is accomplished by disconnecting the detachable
power supply cord at the appliance coupler or at the mains plug.
Ensure the power cord is easily accessible and removable, in the
event of an emergency, which requires immediate disconnection.
PANNEAU NE DOIT ÊTRE ENLEVE QUE
PAR UN RÉPARATEUR QUALIFIÉ.
AVERTISSEMENT
COURANT DE FUITE ÉLEVÉ — FORNIR
UNE MISE À LA TERRE EFFICACE.
WARNING
HIGH LEAKAGE CURRENT -
ENSURE PROPER GROUNDING
To Next Page
