MAINTENANCE & LUBRICATION
129
Spark plug removal to expel water from the engine
If water has been ingested into the engine, it is important to remove the water as soon as possible by
removing the spark plug and using the starter system to rotate the engine for a short period to expel water
out of the cylinder. Verify that the air box has been drained of water before attempting to expel water.
CAUTION
Major engine damage can result if the vehicle if water is ingested into the engine. Have the vehicle
serviced by your dealer promptly if your vehicle becomes immersed or stalls in water that exceeds the
footrest level. It is important to contact your dealer for service before starting the engine if water has been
ingested. Water inside the engine can cause a ‘hydraulic lock’ effect that can damage the starter and
engine components. The engine oil should be checked for water contamination. Drain and refill with new
engine oil if water is found in the crankcase.
To Next Page
Loading...
Need help?
General
