MAINTENANCE & LUBRICATION
148
Electrical
Head light adjustment
1. Access the head light adjusters:
• Remove the screw
1
, and plastic clamps
2
from the
inner fender panel.
• Remove the panel
3
to expose the head light housing.
2. Turn the adjusting screws
4
to adjust the direction of
the head light low beam and high beam vertically and
horizontally.
3. Test the vehicle to ensure that the headlight adjustment is
satisfactory.
4. Reinstall the inner fender panel, plastic clamps and screw.
WARNING
It is advisable to have your dealer perform headlight
adjustments. Improper adjustment could lead to an accident
resulting in serious injury or death.
1
3
4
2
To Next Page
Loading...
Need help?
General
